Inquiry Basket (
Home » Product List » Fusion Splicer » Optical Fusion Splicer (MW5200)
Product Details
Optical Fusion Splicer (MW5200)
| Model NO.: | MW5200 |
|---|---|
| Trademark: | MW |
Product Description
MW5200 Optical Fusion Splicer
Core to core alignment by PAS technology
( PAS: Profile Alignment System)
Fiber core can be display clearly
Single X or Y view and X & Y view simultaneously
Auto detect cleaved endface fault
Display fiber cleaved and offset angle
Display core and clad offset
5.6 inch TFT color LCD monitor with clear digital image display
USB & VGA interface
Software upgrade via USB interface
| Specefications |
| Model | MW5200 |
| Applicable fibers | SM (ITU-T G.652), MM (ITU-T G.651), DS (ITU-T G.653), NZDS (ITU-T G.655) |
| Fiber cleaved length | 8 ~ 16mm (Coating diameter :250µm ) 16mm ( Coating diameter: 250 ~ 1000µm ) |
| Fiber diameter | Cladding diameter : 80 ~ 150µm Coating diameter :100 ~ 1000μm |
| Fiber Count | Single |
| Fiber aligning method | Core or clad aligning |
| Image processing method | Digital |
| Actual a verage splice loss | 0.02dB ( SM ) , 0.01dB (MM), 0.04dB (DS), 0.04dB( NZDS) |
| Splicing time | Typical 9 sec , with standard SM fiber |
| Splicing mode | 53(templet), 40(user) |
| Splice loss estimate | More accurate |
| Return loss | >60dB |
| Storage of splice result | 4000 results ,20 parameter per result |
| Fiber display and magnification | 300X (X or Y view ) ,150X ( X and Y view ) |
| Tube heating time | Typical 30 sec |
| Tube heating mode | 9(templet), 24(user) |
| Tube heating temperature | Can be adjusted |
| Applicable Protection sleeve length | 60mm , 40mm and a series of micro sleeves |
| Tension test | 2N |
| Electrode life | 2500 |
| No.of splice/heating with battery | Typical 150 cycles (splice/tube heat) with inner Li-battery |
| Display screen | 5.6 TFT inch color LCD monitor |
| Image change over | The fiber image is turned upside down |
| Terminals | USB 1.1 and VGA |
| Operating condition | 0 ~ 5000m above sea level, 0 ~ 95%RH and -10 ~ 50 , respectively, Max. wind velocity of 15m/s |
| Power supply | AC 100-240V with AC adapter; inner Li-battery(8000mAH) |
| Dimensions | 150mm (L) x150mm (W) x150mm (H) |
| Weight | 2.7 Kg excluding battery,3.2 Kg including battery |
| Functions |
| Model | MW5200 |
| Splicing mode | Auto ,Calibrate ,Normal ,Special |
| Fiber cleaved angle threshold set | 0.1 - 10.0 °, 0.1°step |
| Display fiber cleaved angle | Available |
| Display fiber offset angle | Available |
| Auto focusing | Available |
| Auto aligning | Available |
| Auto detect cleaved endface fault | Available |
| Display core offset | Available |
| Display clad offset | Available |
| Fiber partial core Compensation | Available |
| Arc strength automatic adjustment | Available |
| Display inside temperature | Available |
| Display ambient temperature | Available |
| Display heater temperature | Available |
| Display air pressure | Available |
| Display battery voltage | Available |
| Taper Splice | Available |
| Sleep | Available |
| Auto Shut down | Available |
| Software upgrade | Available |
